Starlink Gen 3 Wall Mount Kit for Standard 4/4X V4 Dish, Heavy-Duty Steel

Permanently mount your Starlink dish on a wall, eave, or fascia with a Starlink Gen 3 wall mount kit built for the long haul — and built to install without leaks.INSTALLS WITHOUT A LEAKDrilling a hole through your exterior wall for the Starlink cable is the part of the installation buyers worry about most. This Starlink wall mount kit ships with a plastic sealing plug that closes the RJ45 cable through-wall hole, plus an internal cable routing path that runs the Starlink cable hidden through the pipe adapter, both poles, and the mount base — so the cable stays weatherproof, UV-protected, and out of sight from dish to wall. ENGINEERED TO OUTLAST THE DISH IN WINDThe Starlink Gen 3 Standard dish is rated by Starlink for 60mph winds. This Starlink mount is built to keep holding well past that point: - 1.8mm reinforced steel mount base plate (up from the 1.5mm typical on competing mounts) - 40mm diameter, 2mm wall curved lower pipe- 36mm diameter, 1.5mm wall upper pipe- Powder-coated steel construction with 2-year anti-rust finish- All anchor bolts, screws, and fasteners are stainless steel — no rust streaks on your sidingNO-TOOL ADAPTER MOUNTING, NO WOBBLEThree hand-tightened bolts clamp the Gen 3 pipe adapter solid to the pole — no wrench, no socket set required. After tightening, the dish stays locked in place without the play and wobble that is common across other Gen 3 mounts. 21" REACH WITH FULL ANGLE ADJUSTMENT21 inches of total arm length, with pitch adjustment at the mount base and full 360° azimuth rotation via the pole. Enough clearance for typical residential eaves and fascia, and enough adjustment to keep the dish from contacting the wall during aiming. HARDWARE FOR ANY WALLShips with 6 stainless steel anchor bolts for concrete and brick walls (5cm effective embedment) AND 6 stainless steel self-tapping screws for wood walls, fascia, soffit, and eaves. Includes a hardboard drill template for accurate hole layout, and a Quick Start installation guide. COMPATIBILITYFits: Starlink Standard, Gen 3 (V3), Standard 4, Standard 4X, V4 dish — all share the same snap-in adapter interface. Does NOT fit: Starlink Mini, Starlink Standard Actuated (Gen 2 rectangular), Flat High Performance, Performance Gen 3. WHAT'S IN THE BOXPipe adapter (Gen 3), curved lower pipe, extended upper pipe, mount base, 6× stainless steel concrete anchor bolts, 6× stainless steel self-tapping wood screws, RJ45 cable through-wall sealing plug, hardboard drill template, Quick Start Guide.

• HEAVY-DUTY STEEL BUILT TO OUTLAST THE DISH IN WIND: Powder-coated steel mount with 1.8mm reinforced base plate (vs. 1.5mm standard), 40mm/2mm wall curved lower pipe, 36mm/1.5mm upper pipe - engineered to hold past the dish's own 60mph wind rating. 2-year anti-rust powder coat finish
• SEALED CABLE THROUGH-WALL HOLE - INSTALLS WITHOUT A LEAK: Includes a plastic sealing plug for the RJ45 cable hole drilled through your exterior wall, and the Starlink cable routes completely hidden inside the pipe adapter, both poles, and mount base. No UV exposure, no rain ingress, no ugly cable runs
• FITS STARLINK GEN 3 / V3 / V4 / STANDARD 4 / STANDARD 4X DISH: All current consumer Standard dishes share the same snap-in adapter interface, so one Starlink Gen 3 wall mount kit covers every variant. NOT compatible with Starlink Mini, Standard Actuated (Gen 2 rectangular), or Performance Gen 3
• TOOL-FREE INSTALL, ZERO WOBBLE, 21-INCH ARM CLEARANCE: Three hand-tightened bolts lock the pipe adapter solid against the pole - no wrench needed, no play after tightening. 21-inch total arm length with mount-base pitch adjustment and 360-degree pole azimuth rotation clears typical eaves and fascia during aiming
• WORKS ON CONCRETE OR WOOD - ALL STAINLESS HARDWARE INCLUDED: Ships with 6 stainless steel concrete anchor bolts (5cm embedment) AND 6 stainless self-tapping wood screws - no second trip to the hardware store. Hardboard drill template and Quick Start Guide included. No rust streaks on your siding
• COMPLETE INSTALLATION KIT WITH DRILL TEMPLATE: Package includes pipe adapter for Gen 3, curved lower pipe, extended upper pipe, mount base, RJ45 cable through-wall sealing plug, hardboard drill template, and Quick Start Guide for straightforward installation on any wall surface